IS 250 AWD V6-2.5L (4GR-FSE) (2006)
b. Remove the 2 screws and inlet control servo motor.
2. REMOVE CLEAN AIR FILTER
a. Detach the 2 claws and remove the air filter.
HINT: Be sure to turn the engine switch on (IG) and set the A/C to RECIRCULATION mode before removing the air filter.
3. REMOVE COOLING UNIT WITH FAN MOTOR SUBASSEMBLY
a. Remove the 3 screws and fan motor.
REASSEMBLY
1. INSTALL COOLING UNIT WITH FAN MOTOR SUBASSEMBLY
a. Install the fan motor with the 3 screws.