IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-2126003.png)
b. Insert 2 precision screwdrivers (1.5 or less) into the holes on both sides of the clock assembly at the angle as shown in the illustration.
NOTE: Do not pry on the clock assembly with the screwdrivers as it may damage the clock assembly.
HINT: If precision screwdrivers are not available, use in vehicle tools (part No. 09135-53010).
c. Insert a screwdriver with its tip taped from the underside of the hazard switch, and pull and remove the clock assembly.
NOTE: Do not pry on the hazard switch with the screwdriver as it may damage the switch.
INSTALLATION
1. INSTALL CLOCK ASSEMBLY W/o Navigation System)
a. Connect the connector.
