IS 250 AWD V6-2.5L (4GR-FSE) (2006)
5. REMOVE FRONT DOOR OPENING TRIM COVER LH
6. REMOVE INSTRUMENT SIDE PANEL LH
7. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
8. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
9. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY
10. REMOVE STOP LIGHT SWITCH ASSEMBLY
a. Disconnect the connector.
b. Loosen the lock nut and remove the stop light switch assembly.
INSPECTION
1. INSPECT STOP LIGHT SWITCH ASSEMBLY
a. Measure the resistance according to the value(s) in the table.
Standard Resistance
HINT: If the measurement result is not normal, replace the stop light switch assembly.
INSTALLATION
1. INSTALL STOP LIGHT SWITCH ASSEMBLY