IS 250 AWD V6-2.5L (4GR-FSE) (2006)
c. Turn on the fog light and make sure that the cutoff line falls within the specified area, as shown in the illustration.
4. FOG LIGHT AIMING ADJUSTMENT
a. Adjust the fog light aim into the specified range by turning aiming screw with a screwdriver.
NOTE: The final turn of the aiming screw should be made in the clockwise direction. If the screw is tightened excessively, loosen it and then
retighten it, so that the final turn of the screw is in the clockwise direction.