IS 250 AWD V6-2.5L (4GR-FSE) (2006)
a. When checking resistance with a tester, insert the tester probes from the backside (harness side) of the connector.
b. Use a service wire to check the connector if it is impossible to check continuity from the rear of the connector.
5. PRECAUTION FOR DISCONNECTING THE BATTERY TERMINAL
NOTE:
-
When disconnecting the negative (-) battery terminal, initialize the systems after the terminal is reconnected.
System Name
Power Window Control System
-
Perform the RESET MEMORY (AT initialization) operation after replacing the automatic transmission assembly, engine assembly, or ECM.
HINT: RESET MEMORY cannot be completed by disconnecting the battery terminal.