IS 250 AWD V6-2.5L (4GR-FSE) (2006)
1.
Connect the Diagnostic Tester to DLC3.
2.
Turn the ignition switch and Diagnostic Tester switch ON.
3.
All vehicles except RX 400h:
Select from the Diagnostic Tester menus: DIAGNOSIS, ENHANCED OBDII, VIN, and VIN READ.
RX 400h vehicles:
Select from the Diagnostic Tester menus: DIAGNOSIS, OBD/MOBD, HV ECU, VIN, and VIN READ.
4.
Check the VIN displayed on the Diagnostic Tester.
HINT:
For further explanations, refer to the Technical Information System (TIS), appropriate model repair manual: Diagnostics: SFI System:
Registration.