IS 250 AWD V6-2.5L (4GR-FSE) (2006)
b) Using a screwdriver, unstake the lock washer.
c) Remove the lock nut and lock washer.
d) Remove the bolt and park/neutral position switch assembly.
INSPECTION
1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
Park/Neutral Position Switch (Connector Front View)
a) Measure the resistance according to the value(s) in the table.
Standard Resistance
If the resistance value is not as specified, replace the park/neutral position switch assembly.
ADJUSTMENT
1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY