IS 250 AWD V6-2.5L (4GR-FSE) (2006)
11. CONNECT WATER HOSE JOINT
a. Connect the water hose joint with the bolt.
Torque: 10 N.m (102 kgf.cm, 7 ft.lbf)
12. INSTALL INTAKE MANIFOLD
a. Install a new gasket and the intake manifold with the 4 bolts and 4 nuts.
Torque: 21 N.m (214 kgf.cm, 15 ft.lbf)
b. Connect the SCV position sensor connector.
c. Connect the DC motor connector for the SCV.
13. INSTALL INTAKE AIR SURGE TANK
a. Install a new gasket to the intake air surge tank.
b. Using a 5 mm hexagon socket wrench, install the 6 bolts.
Torque:
Bolts except A 18 N.m (184 kgf.cm, 13 ft.lbf)
c. Install the bolt and 2 nuts to the intake air surge tank.
Torque: