IS 250 AWD V6-2.5L (4GR-FSE) (2006)
g. Deploy the airbag.
1. Connect the red clip of the SST to the battery positive (+) terminal and the black clip of the SST to the negative (-) terminal.
2. Check that no one is within a 10.m(33 ft) radius of the disc wheel which the steering pad is tied to.
3. Press the SST activation switch and deploy the airbag.
CAUTION: When deploying the airbag, make sure that no one is near the tire.
HINT: The airbag is deployed as the LED of the SST activation switch comes on.
h. Dispose of the steering pad.
CAUTION:
-
The steering pad becomes extremely hot when the airbag is deployed, so do not touch it for at least 30 minutes after deployment.
-
Use gloves and safety glasses when handling a steering pad with a deployed airbag.
-
Do not apply water, etc..to a steering pad with a deployed airbag.
-
Always wash your hands with water after completing the operation.
1. Remove the steering pad from the disc wheel.
2. Place the steering pad in a plastic bag, tie it tightly and dispose of it as other general part disposal.