IS 250 AWD V6-2.5L (4GR-FSE) (2006)
Air Bag: Testing and Inspection
Curtain Shield Airbag
ON-VEHICLE INSPECTION
1. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Perform a diagnostic system check.
b. With the curtain shield airbag assembly installed on the vehicle, perform a visual check.If there are any defects as mentioned, replace the front
pillar garnish or roof headlining assembly with a new one: Cuts, minute cracks or marked discoloration on the front pillar garnish or roof
headlining assembly around the curtain shield airbag assembly.
2. INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
a. Perform a diagnostic system check.
b. With the curtain shield airbag assembly removed from the vehicle, perform a visual check. If there are any defects as mentioned,replace the
curtain shield airbag assembly with a new one:
-
Cuts, minute cracks or marked discoloration on the curtain shield airbag assembly.
-
Cracks or other damage to the connectors.
CAUTION: Be sure to follow the correct removal and installation procedures.
Driver Side Knee Airbag
ON-VEHICLE INSPECTION
1. INSPECT DRIVER SIDE KNEE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Perform a diagnostic system check
b. With the driver side knee airbag assembly installed on the vehicle, perform a visual check.If there are any defects as mentioned, replace the