IS 250 AWD V6-2.5L (4GR-FSE) (2006)
d. Connect the pretensioner connector and lock the locking button as shown in the illustration.
NOTE: Securely lock the locking button.
e. Connect the connectors.
4. INSTALL CENTER LOWER PILLAR GARNISH
5. INSTALL FRONT DOOR SCUFF PLATE (W/o Illumination)
6. INSTALL FRONT DOOR SCUFF PLATE (W/ Illumination)
7. INSTALL REAR DOOR SCUFF PLATE
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. PERFORM INITIALIZATION
a. Perform initialization
HINT: Some systems need initialization when disconnecting the cable from the negative battery terminal.
10. INSPECT SRS WARNING LIGHT
a. Inspect the SRS warning light