IS 250 AWD V6-2.5L (4GR-FSE) (2006)
Impact Sensor: Service and Repair
Satellite Switch Set
REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE LH (w/o Illumination)
2. REMOVE FRONT DOOR SCUFF PLATE LH (w/ Illumination)
3. REMOVE FRONT DOOR OPENING TRIM COVER LH
4. REMOVE SIDE INSTRUMENT PANEL LH
5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
6. REMOVE SATELLITE SWITCH SET
a. Remove the 3 screws and the finish panel No. 2 retainer with switch.
b. Disengage the 2 claws and remove the satellite switch set from the finish panel No. 2 retainer with switch.
INSTALLATION
1. INSTALL SATELLITE SWITCH SET
a. Engage the 2 claws and install the satellite switch set.