lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Occupant Detection Sensor (For Manual Seat)|Page 10071 > < Occupant Detection Sensor (For Manual Seat)|Page 10069
Page 3
background image

9. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

a. Using a screwdriver, detach the knob.

HINT:  Tape the screwdriver tip before use.

10. REMOVE FRONT SEAT CUSHION SHIELD WITH NO. 1 CUSHION SHIELD INNER

a. Release the 2 rubber bands of the front seatback board from the front seat frame.

b. Remove the 6 screws.
c. Disengage the claw and remove the cushion shield with No. 1 cushion shield inner.
d. Disconnect the connector from the front power seat lumbar switch.

11. REMOVE FRONT SEAT INNER CUSHION SHIELD RH

12. REMOVE FRONT POWER SEAT SWITCH (W/ Seat Position Memory System)

a. Remove the 3 screws.
b. Disconnect the 2 connectors and remove the front power seat switch.

13. REMOVE FRONT POWER SEAT SWITCH (W/o Seat Position Memory System)

a. Remove the 3 screws.
b. Disconnect the connector and remove the front power seat switch.

Occupant Detection Sensor (For Manual Seat)|Page 10071 > < Occupant Detection Sensor (For Manual Seat)|Page 10069