IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-203005.png)
10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission)
a. Turn the shift knob clockwise and install the shift lever knob sub-assembly.
11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
a. Turn the shift knob clockwise and install the shift lever knob sub-assembly.
12. INSTALL NO. 1 UPPER CONSOLE PANEL GARNISH (for Automatic Transmission)
13. INSTALL NO. 2 UPPER CONSOLE PANEL GARNISH (for Automatic Transmission)
14. PERFORM YAW RATE SENSOR ZERO POINT CALIBRATION See: Acceleration/Deceleration Sensor/Testing and Inspection/Vehicle
Stability Control System (W/O Vdim)
15. INSPECT SENSOR SIGNAL
