IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-222001.png)
Variable Valve Timing Actuator Position Sensor: Service and Repair
REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY
2. REMOVE VVT SENSOR (for Intake Side of Bank 1)
a. Disconnect the sensor connector.
b. Remove the bolt and sensor.
3. REMOVE VVT SENSOR (for Exhaust Side of Bank 1)
a. Disconnect the sensor connector.
b. Remove the bolt and sensor.
4. REMOVE VVT SENSOR (for Intake Side of Bank 2)
a. Disconnect the sensor connector.
b. Remove the bolt and sensor.
