IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-262001.png)
Brake Light Switch: Testing and Inspection
STOP LIGHT SWITCH
ON-VEHICLE INSPECTION
1. INSPECT STOP LIGHT SWITCH ASSEMBLY
a. Check the protrusion of the stop light switch assembly shaft.
Protrusion of the stop light switch assembly shaft: 0.5 to 2.4 mm (0.020 to 0.095 inch)
If the protrusion is not within the specified range, adjust it.
NOTICE: Do not depress the brake pedal.
