IS 250 AWD V6-2.5L (4GR-FSE) (2006)
9. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
a. Using a screwdriver, detach the knob.
HINT: Tape the screwdriver tip before use.
10. REMOVE FRONT SEAT CUSHION SHIELD WITH NO. 1 CUSHION SHIELD INNER
a. Release the 2 rubber bands of the front seatback board from the front seat frame.
b. Remove the 6 screws.
c. Disengage the claw and remove the cushion shield with No. 1 cushion shield inner.
d. Disconnect the connector from the front power seat lumbar switch.
11. REMOVE FRONT SEAT INNER CUSHION SHIELD RH
12. REMOVE FRONT POWER SEAT SWITCH (W/ Seat Position Memory System)
a. Remove the 3 screws.
b. Disconnect the 2 connectors and remove the front power seat switch.
13. REMOVE FRONT POWER SEAT SWITCH (W/o Seat Position Memory System)
a. Remove the 3 screws.
b. Disconnect the connector and remove the front power seat switch.