IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-1404004.png)
b. Remove the rotor assembly from the drive end frame.
7. INSPECT GENERATOR DRIVE END FRAME BEARING
8. REMOVE GENERATOR DRIVE END FRAME BEARING
a. Remove the 4 screws and retainer plate from the drive end frame.
b. Using SST and a hammer, tap out the drive end frame bearing from the drive end frame.
SST09950-60010 (09951-00250), 09950-70010
(09951-07100)
REASSEMBLY
1. INSTALL GENERATOR DRIVE END FRAME BEARING
