IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-1570003.png)
9. REMOVE FRONT AXLE HUB SUB-ASSEMBLY (for 4WD)
10. SEPARATE FRONT LOWER BALL JOINT ASSEMBLY (for 2WD)
a) Remove the 2 bolts and steering knuckle from the lower ball joint.
11. SEPARATE FRONT LOWER BALL JOINT ASSEMBLY (for 4WD)
a) Remove the 2 bolts and steering knuckle from the lower ball joint.
12. SEPARATE TIE ROD ASSEMBLY (for 4WD)
a) Remove the clip and nut.
b) Using SST, separate the tie rod end from the steering knuckle.
SST 09628-00011
NOTICE:
^
Use caution not to damage the steering knuckle because it is made of aluminum and may be damaged easily.
