IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-1570006.png)
b) Using a chisel and hammer, stake the front axle hub nut.
11. INSTALL FRONT SPEED SENSOR (for 2WD)
12. INSTALL FRONT SPEED SENSOR (for 4WD)
13. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
14. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
15. CHECK ABS SPEED SENSOR SIGNAL
