IS 250 AWD V6-2.5L (4GR-FSE) (2006)
a) Remove the 2 bolts, and separate the speed sensor from the steering knuckle.
NOTICE:
^
Be careful not to damage the speed sensor.
^
Prevent foreign matter from adhering to the speed sensor.
4. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY (for 2WD)
a) Remove the 2 bolts, and disconnect the brake caliper assembly (for 2GR-FSE)
NOTICE: Use wire or equivalent to prevent the brake caliper from hanging down by the flexible hose.
b) Remove the No.1 caliper plates from the brake caliper. (for 4GR-FSE)
NOTICE: Use wire or equivalent to prevent the brake caliper from hanging down by the flexible hose.
5. SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY (for 4WD)