IS 250 AWD V6-2.5L (4GR-FSE) (2006)
INSTALLATION
1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER
a) Install the tire pressure warning ECU and receiver with the bolt.
Torque: 4.5 Nm (46 kgf-cm, 40 inch lbs.)
b) Connect the connector.
2. INSTALL RADIO RECEIVER ASSEMBLY
HINT: Refer to the instructions for installation of the radio receiver assembly.
3. REGISTER OF TRANSMITTER ID
SST 09843-18040
4. INSPECT TIRE PRESSURE WARNING SYSTEM