IS 250 AWD V6-2.5L (4GR-FSE) (2006)
6. INSTALL FRONT AXLE HUB BOLT
a) Install the washer and nut to a new bolt as shown in the illustration.
b) Using a screwdriver or equivalent to hold the hub, turn the wheel nut to pull the hub bolt until the bottom surface of the hub bolt head touches
the axle hub.
NOTICE: Do not damage the threads of the hub bolts.
7. INSTALL FRONT DISC
8. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY (for 2WD)
9. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY (for 4WD)
10. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)