IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-1200006.png)
a) Install the No.2 differential support protector to the rear suspension member brace with the 2 nuts.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
17. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
18. INSPECT AND ADJUST REAR WHEEL ALIGNMENT
19. CHECK ABS SPEED SENSOR SIGNAL
