IS 250 AWD V6-2.5L (4GR-FSE) (2006)
b) Install the 4WD control ECU with the bolt and nut.
Torque: Bolt 14 Nm (1137 kgf-cm, 10 ft. lbs.)
Nut 6.0 Nm (61 kgf-cm, 54 inch lbs.)
c) Connect the junction connector with the 2 clips.
2. INSTALL NO.2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
3. INSTALL SIDE INSTRUMENT PANEL RH
4. INSTALL FRONT DOOR OPENING TRIM COVER RH
5. INSTALL FRONT DOOR SCUFF PLATE RH (w/o Illumination)
HINT: Use the same procedures for the RH side and the LH side.
6. INSTALL FRONT DOOR SCUFF PLATE RH (w/Illumination)
HINT: Use the same procedures for the RH side and the LH side.