IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-2351004.png)
b. Install 2 new windshield glass stoppers onto the glass, as shown in the illustration.
3. INSTALL WINDSHIELD OUTSIDE MOULDING
a. Using a brush or sponge, coat the edge of the glass and the contact surface with Primer G.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not coat the adhesive with Primer G.
-
Do not keep any of the opened Primer G for later use.
b. Install the windshield outside moulding, as shown in the illustration.
4. INSTALL WINDSHIELD GLASS ADHESIVE DAM
a. Coat the installation part of the dam with Primer G.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not apply too much primer.
