IS 250 AWD V6-2.5L (4GR-FSE) (2006)
/Page-2376006.png)
6. INSTALL NO. 3 COOL AIR INTAKE DUCT SUBASSEMBLY
a. Install the No. 3 cool air intake duct sub-assembly with the 2 bolts and the screw.
Torque: 5.5 N.m (56 kgf.cm, 49 in.lbf)
b. Engage the engine under cover clip.
c. Install the 3 front fender liner LH screws.
7. INSTALL HEADLIGHT ASSEMBLY LH
8. INSTALL FRONT BUMPER ASSEMBLY
9. INSTALL FRONT UPPER FENDER PROTECTOR LH
10. INSTALL ENGINE ROOM SIDE COVER LH
11. INSTALL COOL AIR INTAKE DUCT SEAL
