IS 250 RWD V6-2.5L (4GR-FSE) (2007)
d. Remove the screw.
e. Disengage the 2 claws and remove the steering pad switch.
f.
Remove the screw.
g. Disengage the 2 claws and remove the steering pad switch.
INSTALLATION
1. INSTALL STEERING PAD SWITCH ASSEMBLY
a. Engage the 2 claws and install the steering pad switch.
b. Install the screw.
c. Engage the 2 claws and install the steering pad switch.
d. Install the screw.
e. Connect the connector to the spiral cable.