IS 250 RWD V6-2.5L (4GR-FSE) (2007)
-
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimension
diagram)
-
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
-
After welding, apply polyurethane foam to the corresponding parts.
-
After welding, apply body sealer and undercoating to the corresponding parts.
-
After applying the top coat, apply antirust agent to the internal panel portion of the closed section structural weld points.