IS 250 RWD V6-2.5L (4GR-FSE) (2007)
Central Control Module: Service and Repair
Network Gateway ECU
NETWORK GATEWAY ECU
REMOVAL
NOTE: When disassembling the network gateway ECU, eliminate static electricity by touching the vehicle body to prevent the components from being
damaged.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment.
2. REMOVE FRONT DOOR SCUFF PLATE
HINT: Removal procedure of the RH side is the same as that of the LH side.