IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-1799025.png)
a. Disengage the 4 clips and claw, and remove the roof side inner garnish LH.
115. REMOVE ROOF SIDE INNER GARNISH RH
116. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER
117. REMOVE RAIN SENSOR
118. REMOVE MAP LIGHT ASSEMBLY (w/o Sliding Roof)
a. Using a screwdriver, disengage the 3 claws and open the cover.
b. Remove the 2 screws.
c. Using a moulding remover, disengage the 2 clips.
d. Disconnect the connector. Remove the map light assembly.
119. REMOVE MAP LIGHT ASSEMBLY (w/ Sliding Roof)
a. Using a screwdriver, disengage the 3 claws and open the cover.
b. Remove the 2 screws.
c. Using a moulding remover, disengage the 2 clips.
d. Disconnect the connector. Remove the map light assembly.
120. REMOVE SPOT LIGHT ASSEMBLY
