IS 250 RWD V6-2.5L (4GR-FSE) (2007)
4. Push and hold the sliding roof switch (this is position 11). Continue holding the switch until the following movement is complete: the moon roof will
slide close, re-slide open, after about 10 seconds the moon roof will again slide close and stop at the fully closed position.
5. Confirm that the auto operation features work for slide open, slide close, tilt up, and tilt down.
Moon Roof is in jam protection or abnormal operation for TILT position
1. Switch ON the ignition (IG) by pressing the "START/STOP" button twice.
2. Rotate the moon roof switch position to 10. The moon roof should be in the full tilt up position.
3. Rotate the moon roof switch position to 9. The moon roof will move to tilt down and re-tilt up and stop at the full tilt up.
4. Push and hold the moon roof switch (this is position 11). Continue holding the switch until the following movement is complete: the moon roof will
tilt down re-tilt up, after about 10 seconds the moon roof will again tilt down and stop at the full close position.
5. Confirm that the auto operation features work for slide open slide close tilt up and tilt down.
NOTE
If the moon roof reverses in step 5, start again from the beginning.