IS 250 RWD V6-2.5L (4GR-FSE) (2007)
3. INSTALL BRAKE ACTUATOR ASSEMBLY WITH BRACKET
a. Install the actuator assembly with bracket to the body with the 2 bolts and nut.
Torque:19 N.m (195 kgf.cm, 14 ft.lbf)
NOTE: Do not to damage the brake tubes.
b. Using SST, connect the No. 3 front brake tube to the flexible hose.
SST 09023-00101
Torque:15 N.m (155 kgf.cm, 11 ft.lbf)
c. Install the grommet to the body.
NOTE: Make sure that the grommet is installed correctly.
d. Temporarily tighten each brake tube to the correct positions of the brake actuator assembly with bracket as shown in the illustration.