IS 250 RWD V6-2.5L (4GR-FSE) (2007)
f.
Remove the 2 nuts and separate the instrument panel junction block assembly.
g. Disconnect the parking brake switch connector.
h. Remove the 3 nuts and parking brake pedal from the body.
i.
Pull up the parking brake pedal claw.
j.
Remove the lock nut and No. 1 wire adjusting nut of the No. 1 parking brake cable assembly from the parking brake pedal.
k. Remove the clip and No. 1 parking brake cable assembly from the parking brake pedal.
32. REMOVE PARKING BRAKE PEDAL ASSEMBLY (for 4WD)
a. Remove the parking brake return with damper spring.