IS 250 RWD V6-2.5L (4GR-FSE) (2007)
Cruise Control Switch: Service and Repair
Cruise Control Main Switch
CRUISE CONTROL MAIN SWITCH
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE NO.2 LOWER STEERING WHEEL COVER
3. REMOVE NO.3 LOWER STEERING WHEEL COVER
4. REMOVE STEERING PAD
5. REMOVE CRUISE CONTROL MAIN SWITCH
a. Disconnect the connector.
b. Remove the 2 screws and the cruise control main switch.
INSTALLATION