IS 250 RWD V6-2.5L (4GR-FSE) (2007)
Radiator Cooling Fan Motor Relay: Testing and Inspection
COOLING FAN RELAY
ON-VEHICLE INSPECTION
1. INSPECT COOLING FAN RELAY
a. Measure the resistance according to the value(s) in the table.
Standard Resistance
Measure the resistance according to the value(s) in the table.
2. INSPECT NO. 2 COOLING FAN RELAY
a. Measure the resistance according to the value(s) in the table.
Standard Resistance
If the result is not as specified, replace the No. 2 cooling fan relay.
3. INSPECT NO. 3 COOLING FAN RELAY
a. Inspect the resistance of the relay.