IS 250 RWD V6-2.5L (4GR-FSE) (2007)
B.
Install 3 NEW gaskets as shown in the illustration.
C.
Install a NEW gasket to the head cover.
D.
Install the head cover with the 12 bolts.
Torque: Bolts A:
21 N*m (214 kgf*cm, 15 ft*lbf)
Torque: Bolts except A:
10 N*m (102 kgf*cm, 7 ft*lbf)
E.
For 4WD:
Install the engine hanger with the 2 bolts.
Torque: 33 N*m (337 kgf*cm, 24 ft*lbf)
13.
Install the oil pipe union bolt to the No. 2 oil pipe.
Torque: 60 N*m (612 kgf*cm, 44 ft*lbf)