IS 250 RWD V6-2.5L (4GR-FSE) (2007)
19.
Remove the ignition coil assemblies.
20.
Remove the No. 1 oil pipe union bolt from the oil pipe.
21.
Remove No. 2 oil pipe union bolt from the oil pipe.
22.
Remove the cylinder head cover LH.
A.
Remove the 12 bolts, oil seal washer, and cylinder head cover.
^
Cover the hole around the timing chain with shop rags to prevent foreign material from falling into the engine.
^
The baffle plate is located on the back of the portion shown in the illustration.
^
Do NOT damage the baffle plate when removing the cylinder head cover.
B.
Remove the cylinder head cover gasket from the cylinder head cover.
C.
Remove the 3 gaskets.