IS 250 RWD V6-2.5L (4GR-FSE) (2007)
8.
Install the NEW gasket and the timing chain cover plate with the 4 bolts.
Torque: 9 N*m (93 kgf*cm, 7 ft*lbf)
9.
Install the injector driver with the bolt and 2 nuts.
Torque: 10 N*m (102 kgf*cm, 7 ft*lbf)
10.
Install the No. 1 engine cover with the 3 clips.
11.
Install the cylinder head cover RH.
A.
Apply FIPG sealant as shown in the illustration.
FIPG sealant: P/N 0882600080 (or equivalent)
NOTE
^
Remove any oil from the contact surface.
^
Install the head cover within 3 minutes after applying the FIPG sealant.
^
Do NOT start the engine for at LEAST 2 hours after installing.