IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-518002.png)
q. Connect the 2 injector driver connectors as shown in the illustration.
r.
Install the 6 spark plugs.
Torque: 25 Nm (254 kgf-cm, 18 ft. lbs.)
s. Install the 6 ignition coils.
Torque: 10 Nm (102 kgf-cm, 7 ft. lbs.)
t.
Connect the 6 injector connectors.
u. Install the intake air surge tank.
v. Install the air cleaner cap with the air cleaner hose.
w. Install the air cleaner inlet No. 1.
Torque: 5.0 Nm (51 kgf-cm, 44 inch lbs.)
x. Install the V-bank cover.
y. Remove the engine room side cover LH.
z. Remove the engine room side cover RH.
aa. Install the cool air intake duct seal.
