IS 250 RWD V6-2.5L (4GR-FSE) (2007)
4. INSTALL VVT SENSOR (for Intake Side of Bank 1)
a. Install the sensor with the bolt.
Torque:10 N.m (102 kgf.cm, 7 ft.lbf)
b. Connect the sensor connector.
5. INSTALL V-BANK COVER SUB-ASSEMBLY
4. INSTALL VVT SENSOR (for Intake Side of Bank 1)
a. Install the sensor with the bolt.
Torque:10 N.m (102 kgf.cm, 7 ft.lbf)
b. Connect the sensor connector.
5. INSTALL V-BANK COVER SUB-ASSEMBLY