IS 250 RWD V6-2.5L (4GR-FSE) (2007)
B.
Using a 19-mm union nut wrench, connect the fuel pipe.
Torque: 30 N*m (306 kgf*cm, 22 ft*lbf)
C.
Connect the connector to the fuel pump.
18.
Install the No. 1 fuel pipe.
A.
Install the No. 1 fuel pipe with the 2 bolts.
Torque: 10 N*m (102 kgf*cm, 7 ft*lbf)
B.
Connect the 2 fuel hoses.
19.
Connect the fuel main tube.
20.
Install the air surge tank assembly.
A.
Install a NEW gasket to the intake air surge tank.
B.
Using a 5-mm hexagon socket wrench, install the 6 bolts.
Torque: Bolts except A:
18 N*m (184 kgf*cm, 13 ft*lbf)
C.
Install the bolt and 2 nuts to the intake air surge tank.
Torque:
Bolt A: 21 N*m (214 kgf*cm, 15 ft*lbf)
Torque: