IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-584002.png)
b. Disconnect the camshaft timing oil control valve connector.
c. Remove the bolt and camshaft timing oil control valve.
d. Remove the O-ring from the camshaft timing oil control valve.
22. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Exhaust Side)
a. Disconnect the camshaft timing oil control valve connector.
b. Remove the bolt and camshaft timing oil control valve.
c. Remove the O-ring from the camshaft timing oil control valve.
23. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Bank 2 Intake Side)
a. Disconnect the 2 wire harness cramps from the bracket.
b. Remove the 2 bolts and bracket.
c. Disconnect the camshaft timing oil control valve connector.
d. Remove the bolt and camshaft timing oil control valve.
e. Remove the O-ring from the camshaft timing oil control valve.
INSTALLATION
