IS 250 RWD V6-2.5L (4GR-FSE) (2007)
(b) Remove the 2 bolts and 2 compression springs from the tail exhaust pipe assembly.
(c) Remove the front exhaust pipe assembly and 3 gaskets.
6. REMOVE TAIL EXHAUST PIPE ASSEMBLY
(a) Disconnect the 6 exhaust pipe supports to remove the tail exhaust pipe assembly.
7. REMOVE EXHAUST PIPE DAMPER
(a) Remove the 2 bolts and exhaust pipe damper.
8. REMOVE TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY
(a) Using a plastic hammer uniformly tap off the exhaust pipe baffle sub-assemblies.
INSTALLATION
1. INSTALL TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY
(a) Align the baffle with the protruding part of the tail exhaust pipe assembly as shown in the illustration.