IS 250 RWD V6-2.5L (4GR-FSE) (2007)
Blower Unit
DISASSEMBLY
1. REMOVE INLET CONTROL SERVO MOTOR
a. Detach the claw and remove the lever.
b. Remove the 2 screws and inlet control servo motor.
2. REMOVE CLEAN AIR FILTER
a. Detach the 2 claws and remove the air filter.
HINT: Be sure to turn the engine switch on (IG) and set the A/C to RECIRCULATION mode before removing the air filter.
3. REMOVE COOLING UNIT WITH FAN MOTOR SUB-ASSEMBLY
a. Remove the 3 screws and fan motor.
REASSEMBLY