IS 250 RWD V6-2.5L (4GR-FSE) (2007)
8. REMOVE TIRE PRESSURE ANTENNA REAR LH
(a)
Disconnect the connector.
(b) Remove the 2 nuts and the rear left tire pressure warning antenna assembly.
INSTALLATION
1. INSTALL TIRE PRESSURE ANTENNA FRONT RH
(a)
Install the front right tire pressure monitor antenna assembly with the nut.
Torque: 7.5 N*m (77 kgf*cm, 66 in.*lbf)
(b) Connect the connector.
2. INSTALL FRONT FENDER LINER RH
3. INSTALL FRONT TIRE (RH)
Torque: 103 N*m (1,050 kgf*cm, 911 in.*lbf)
4. INSTALL TIRE PRESSURE ANTENNA REAR LH
(a)
Install the rear left tire pressure monitor antenna assembly with the 2 nuts.