IS 250 RWD V6-2.5L (4GR-FSE) (2007)
Dome Lamp: Testing and Inspection
INSPECTION
1. INSPECT REAR ROOM LIGHT (PERSONAL LIGHT)
a. Disconnect the R8 connector from the rear room light.
b. Measure the resistance according to the value(s) in the table given.
c. Measure the voltage according to the value(s) in the table given.
If the result is not as specified, repair or replace the wire harness or connector.
d. Connect the (+) lead from the battery to terminal 1 and the (-) lead to terminal 3.
e. Check that the personal light comes on.
If the result is not as specified, replace the rear room light assembly.