IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-2052005.png)
d. Install the clamp.
e. Connect the connector.
2. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY (for 4WD)
a. Install the 2 bolts.
Torque: 14 N.m (143 kgf.cm, 10 ft.lbf)
b. Install the front height control sensor sub-assembly with the bolt.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
c. Connect the connector.
3. INSTALL FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY (for 2WD)
a. Install the 2 bolts.
Torque: 14 N.m (143 kgf.cm, 10 ft.lbf)
