IS 250 RWD V6-2.5L (4GR-FSE) (2007)
Evaporative Emission Control Canister: Service and Repair
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FLOOR UNDER COVER
a. Remove the 5 nuts, 4 clips and floor under cover.
3. REMOVE CHARCOAL CANISTER ASSEMBLY
a. Disconnect the wire harness from the 2 clamps.
b. Disconnect the 2 quick connectors, hose and connector.
c. Remove the 4 nuts, 2 spacers and charcoal canister assembly.
INSTALLATION