IS 250 RWD V6-2.5L (4GR-FSE) (2007)
/Page-968001.png)
Crankshaft Position Sensor: Testing and Inspection
INSPECTION
1. INSPECT CRANKSHAFT POSITION SENSOR
a. Measure the resistance between the terminals.
NOTE: In the table the terms "cold" and "hot" refer to the temperature of the coils. "Cold" means approximately -10 to 50 °C (14 to 122 °F).
"Hot" means approximately 50 to 100 °C (122 to 212 °F).
If the resistance is not as specified, replace the sensor.
